Slim
Small diameter for compact link management.
CONNECTIONS / TETHER
The link to the surface is part of the vehicle.
Slim and Strong tethers and fibre-optic solutions, selected for communications, field handling and termination integration.
Request informationTHE SYSTEM IN PRACTICE
The tether carries data between the ROV and the pilot station, but also adds bulk and drag. The choice depends on length, environment, instruments and tether recovery arrangements.
Slim and Strong versions use copper conductors with different constructions. Fibre optics are an alternative to assess together with converters and terminations, not just as a cable replacement.
Small diameter for compact link management.
Different construction and conductor count, depending on configuration.
Dedicated communication architecture with conversion devices.
CONFIGURATIONS, EQUIPMENT AND DATA
The tether carries commands, telemetry and video. Slim and Strong cables are designed for underwater use with neutral buoyancy, slightly positive in salt water.
In our reference electrical configurations, transmission may deteriorate beyond approximately 200 m — 300 m for Strong. Dedicated interfaces can mitigate the issue; fibre optics offer an alternative for greater lengths. This is not a universal threshold for every network.
| Common jacket | Flexible polyurethane |
|---|---|
| Reinforcement and filling | Kevlar and Dacron; water-repellent compound |
| Specified strength | 160 kg for these cable versions |
| Conductors | Unshielded twisted pair, 26 AWG |
| Slim | 4 mm diameter; weight in air 0.012 kg/m |
| Strong | 7.6 mm diameter; weight in air 0.043 kg/m |
| Type | Multi-fibre single-mode |
|---|---|
| Outer diameter | 4 mm |
| Breaking strength specified on this page | 300 kg |
| Operating temperature | −40 to +80 °C |
| Accessories | Underwater connector and dedicated reel |
The dedicated fibre-optic page specifies approximately 250 kg rather than 300 kg: these values relate to the specific cable, not a single common rating. Cable diameter and strength do not replace connector and termination limits.
FROM SPECIFICATION TO OPERATION
Environment, equipment and operational objectives.
Together, we define the right configuration.